Developing microencapsulated 12‐hydroxystearic acid (HSA) for phase change material use

Phase change materials (PCM) have an increasingly more important role as a thermal energy storage (TES) media. However, leakage problem of PCM causes limitation during their integration in TES systems. Therefore, the encapsulation of PCMs is attracting research interest to extend usage of PCMs in real TES applications in recent years. In this study, hydroxystearic acid (HSA) was encapsulated with polymethyl methacrylate (PMMA) and different PMMA comonomer shells via emulsion polymerization method for the first time in literature. HSA with high melting temperature range (74–78°C) can widen the scope of using PCMs, and the encapsulated form can make it more versatile. The chemical structures, morphologies, and thermophysical properties of capsules were determined by FT‐IR, SEM, DSC, TGA, and thermal infrared camera. Among the produced HSA capsule candidates, PMMA‐HEMA is the most promising with latent heat of 48.5 J/g with melting range of 47 to 85°C. SEM analysis indicated that the capsules have spherical shape with compact surface at nano‐micro (100–440 nm) size range; however, some capsules exhibited agglomeration.     

光伏阵列倾角及方位角的最优化研究

根据光伏阵列的特点建立了光伏阵列的数学模型,分析光伏倾角和方位角对容量和能量价值最大化的影响,并结合2017年的发电数据进行了对比研究,计算出容量和能量价值最大化的倾角和方位角。实验结果表明:该方法能够获得最佳的光伏安装角度,具有较高的应用价值。     

Deciphering the Origins of P1-Induced Power Losses in Cu(Inx,Ga1–x)Se2 (CIGS) Modules Through Hyperspectral Luminescence

In this report, we show that hyperspectral high-resolution photoluminescence mapping is a powerful tool for the selection and optimization of the laser ablation processes used for the patterning interconnections of subcells on Cu(In_x,Ga_1−x)Se₂ (CIGS) modules. In this way, we show that in-depth monitoring of material degradation in the vicinity of the ablation region and the identification of the underlying mechanisms can be accomplished. Specifically, by analyzing the standard P1 patterning line ablated before the CIGS deposition, we reveal an anomalous emission-quenching effect that follows the edge of the molybdenum groove underneath. We further rationalize the origins of this effect by comparing the topography of the P1 edge through a scanning electron microscope (SEM) cross-section, where a reduction of the photoemission cannot be explained by a thickness variation. We also investigate the laser-induced damage on P1 patterning lines performed after the deposition of CIGS. We then document, for the first time, the existence of a short-range damaged area, which is independent of the application of an optical aperture on the laser path. Our findings pave the way for a better understanding of P1-induced power losses and introduce new insights into the improvement of current strategies for industry-relevant module interconnection schemes.     

基于热负荷自动调节的延迟焦化加热炉三点注汽量智能优化

针对国内某炼油厂延迟焦化加热炉三点注汽问题，采用热负荷自动调节的算法进行了研究。运用该模型方法，分析了三点注汽量对加热炉热负荷和炉管结焦系数的影响，发现三点注汽量的改变均会对热负荷和炉管结焦系数产生影响，主要表现为提高注汽量将会提高热负荷，同时降低结焦系数；第1点注汽量和第2点注汽量对热负荷和结焦系数的影响较强，第3点注汽量对热负荷和结焦系数的影响较弱。在实际操作中，加热炉中的结焦程度既不能太强也不能太弱，合适的结焦系数能够保证正常开工周期里炉管不结焦，也能保证瓦斯、注汽量等参数的合理分配。通过对热负荷、注汽量的智能分配，可得到不同原料油加工负荷条件下更加合理的装置运行方案。     

改进Elman神经网络在短期热负荷预测中的应用

热电厂的短期热负荷预测在城市集中供暖中起着至关重要的作用,直接影响热电厂的经济效益和热能利用率。电厂的短期热负荷一般采用神经网络预测模型进行预测,而BP神经网络应用最为广泛。Elman神经网络算法在BP神经网络基础上加入了承接层,作为一步延时算子,实现记忆能力,使系统具备适应时变能力,增强系统全局稳定性。但Elman神经网络算法模型的构造依然需要大量样本的支撑,而且输入层的变量多,导致预测时间依然很长,收敛速度慢。该文在Elman神经网络预测前,进行了相关系数预处理和对样本中异常值的平均化预处理,通过数据归一化运算,使Elman神经网络输入层变量大幅减少。仿真实验表明,改进的Elman神经网络算法使预测模型快速寻优,减少预测时间的同时明显提高预测精度。     

Research on heat dissipation performance and flow characteristics of air‐cooled battery pack

With the depletion of fossil fuels and the aggravation of environmental pollution, the research and development speed of electric vehicles has been accelerating, and the thermal management of battery pack has become increasingly important. This paper selects the electric vehicle battery pack with natural air cooling as the study subject, conducts simulation analysis of the heat dissipation performance of battery packs with and without vents. Then this paper researches on the influence of internal flow field and external flow field. Field synergy principle is used to analyze the effect of velocity field and temperature field amplitude. The results show the following: it is found that the maximum temperature rise and the internal maximum temperature difference of the battery pack with vents are reduced by about 23.1% and 19.9%, raising speed value can improve the heat dissipation performance, and raising temperature value can decrease the heat dissipation performance. Reasonable design of the vents can make the inner and outer flow field work synergistically to achieve the best cooling effect. Then the reference basis for the air cooling heat dissipation performance analysis of electric vehicle, battery pack structure arrangement, and air‐inlet and air‐outlet pattern choosing are offered.     

燃煤电厂软土层地基预处理方案和施工探究

本文阐述了预处理的重要性,揭示了当前施工中存在的问题,并对软土层地基处理提出了具体的方案。     

Simulation study on the influence of magnetic field in the near-anode region on anode power deposition of ATON-type Hall thruster

The highest deposition of power and temperature is always near the cusp of the ATON-type Hall thruster. This shows that when there are electrons gathering at the cusp, the distribution of heat load will be uniform, which will potentially damage the reliability. Therefore, we optimize the magnetic field near the anode. We changed the magnetic field characteristics in the near-anode region with an additional magnetic screen, and performed numerical simulation with particle-incell simulation. The simulation results show that the magnetic field of the thruster with the additional magnetic screen can alleviate the over-concentration of power deposition on the anode and reduce the power deposition in the anode by 20%, while ensuring that the overall magnetic field characteristics do not change significantly.     

两池火耦合作用下柴油拱顶罐热响应的数值模拟

化工园区多池火事故是典型的高后果低概率事件。鉴于目前两池火辐射模型存在一定局限性，本文采用数值模拟方法，以3个直线排布的5000m³柴油拱顶罐为研究场景，从热释放速率、火焰形态、热辐射强度三方面分析两池火燃烧特性，并与单池火场景对比，考虑储罐间距这一影响因素，进一步研究目标储罐热响应。结果表明：采用GB 50160—2008（2018年版）规定的防火间距，两燃烧罐产生的池火会发生耦合作用，并得出目标储罐受到的热辐射强度分布，最高热辐射达17.04kW/m²；两池火作用下目标储罐的温度、Mises应力与失效时间分别为644℃、356MPa、936s，单池火为488℃、280MPa、2880s，目标储罐在两池火作用下的变形也比单池火更为严重；随着储罐间距增加，目标储罐的温度与Mises应力逐渐减小，失效时间逐渐增加，当储罐间距为标准防火间距的2.5倍（20m）时，失效时间为2800s，与单池火作用产生的失效时间2880s较为接近。本研究可为优化储罐防火间距及区域韧性提升提供理论指导。